Elegant, timeless furnishings take your bedroom to the next level. Nothing does that better than this two-drawer nightstand. The antiqued white finish with a wonderful grain texture oozes sophistication, while the dark bronze-tone hardware adds an ornate touch. Felt finishing in the top drawer and a concealed drawer inside the lower drawer round out the piece for the ultimate tasteful bedroom.
FINISH & MATERIAL
White | Wood Products and Other
FEATURES
ADDITIONAL DIMENSION
Carton Weight =119Bls, L= 21.5", W=31.63" H= 21.5"
ADDITIONAL INFO
Made with select oak veneer, engineered wood and solid wood components;Antiqued white finish with grain texture;Dark bronze-toned knobs;2 smooth-gliding drawers with dovetailed construction and ball bearing side glides;Upper drawer with felt bottom;Concealed drawer inside lower drawer;Assembly required
FINISH & MATERIAL
White | Wood Products and Other
FEATURES
ADDITIONAL DIMENSION
Carton Weight =119Bls, L= 21.5", W=31.63" H= 21.5"
ADDITIONAL INFO
Made with select oak veneer, engineered wood and solid wood components;Antiqued white finish with grain texture;Dark bronze-toned knobs;2 smooth-gliding drawers with dovetailed construction and ball bearing side glides;Upper drawer with felt bottom;Concealed drawer inside lower drawer;Assembly required
All of our furniture comes with a 1 Year Manufacturers Warranty against manufacturing defects. The warranty covers defects such as major wood cracks, veneer pops, visual wear and tear on upholstery, or malfunctioning of reclining. MM Furniture reserves the right to determine if the issue is warrantable. Most of our wood products have very low defect rates. However, upholstery products, especially reclining products, even the most high end, have much higher defect rates. The cost effective 5 year protection plan is a solution we strongly recommend for all customers whose purchase upholstery products.
Warranty is not covered for any of the following conditions:
- COMMERICAL use on any commercial space.
- WOOD Any natural effect in color variations or graining, natural characteristics such as knots, mineral streaks, or pitch pockets.
- MARBLE Any natural effect in color variations or graining and veining are to be expected and not considered defects.
- METAL Natural aging of metals, rust, or tarnishing due to scratches or abrasions.
- GLASS Small air bubbles, surface waving and lightly pitted areas may occur during manufacturing and are not considered defects.
- LEATHER natural markings, grain variations, and minor indentations.
- Changing colors and texture of fabrics, leathers, marble, or wood finishes over time.
- Damages due to normal wear and tear.
- Improper maintenance, improper use, improper cleaning, improper installation, or use other than intended.
- Damages incurred during assembling or maintenance.
